Crystal clear nights, safer drives
Headlight Restoration
Cloudy, yellowed lenses scatter light and shorten the reach of your beams. Our restoration service removes oxidation, levels the surface with controlled sanding, and finishes with an automotive 2K UV-stable clear—bringing back clarity, output, and a clean, modern look.
Book Headlight Restoration (Both Lenses)
What’s Included
- Mask surrounding paint & trim for safe work area.
- Multi-stage wet sanding (typ. 600 → 1000 → 2000 → 3000 grit) to remove oxidation and level the surface.
- Solvent panel prep to remove residues and ensure clear-coat adhesion.
- Automotive 2K urethane clear coat applied for durable, UV-stable protection and long-term clarity.
- Final inspection & light output check.
Upcharges & Notes
- Severe oxidation/crazing that requires additional sanding passes: +$40.
- Deep cracks, internal moisture, or delaminating inner coatings can’t be corrected—lens replacement recommended.
- Tail lights / fog lights (per pair): +$50.
- Cure care: avoid washing/rain for 24 hours; no abrasive polishes on lenses.
Do You Need It?
- Noticeable yellowing, haze, or a “frosted” look on lenses.
- Dimmer low beams, scattered light, or failing state inspection.
- Oxidation returns quickly after DIY kits with wipe-on sealers.
What You Gain
- Sharper beam pattern and improved nighttime confidence.
- Modern, clear appearance that lifts the whole front end.
- Longer-lasting protection with a true 2-part automotive clear.
Our Process (Short & Meticulous)
| Step | What We Do | Why It Matters |
|---|---|---|
| Protect & Inspect | Mask edges and assess oxidation, pitting, or cracking. | Clean edges reduce sanding marks on paint and guide grit selection. |
| Level | Wet sand in controlled stages (coarse → fine), then refine. | Removes yellowed layer uniformly; sets a smooth foundation. |
| Prep | Solvent wipe and lint-free dryness checks. | Promotes strong, even adhesion for the clear coat. |
| Seal | Apply catalyzed 2K urethane clear, then dust-free cure window. | True UV stability and durability vs. short-term wipes. |
Headlight Restoration FAQs
How long does it last?
With sensible washing and no abrasive polishing, most daily-driven cars see durable clarity for years from a 2K clear. Severe sun exposure and neglect shorten lifespan; garaging and regular washing extend it.
Will you remove the bumper or lenses?
No. This is performed on-vehicle in most cases. If a lens must be removed to correct edge failure, we’ll discuss options before work (rare).
What can’t be fixed?
Internal moisture, reflector damage, deep cracks, and inner-layer delamination require replacement housings. We’ll point these out during inspection.
Any aftercare?
Keep lenses dry for 24 hours, avoid brush/tunnel washes for a week, and wash with pH-neutral soap. Don’t polish lenses—if they ever lose slickness, ask us to decon and re-top with a compatible protectant.
Maintain the New Clarity
Keeping the rest of the vehicle easy to wash helps headlights stay cleaner, too. Learn how long-term coatings change winter maintenance and resist salt buildup.
Still have questions?
Ask our helper in the bottom right of your screen.
