Grand Rapids Ceramic Coating

Yes. When installed correctly, ceramic is safe for factory paint and most PPF. We prep the surface properly and apply the coating on approved surfaces to improve gloss, make washing easier, and add a durable protective layer.

Quality coatings don’t behave like a film or paint, so there’s no “peeling” layer. Issues usually come from poor prep or improper installation. Our process focuses on proper decontamination, panel prep, and controlled application.

Yes. Ceramic is a longer-term protective layer than typical wax/sealants, and it keeps the surface slick and hydrophobic, meaning water beads and dirt releases more easily. You won’t need to wax to get protection.

It helps resist light marring and reduces how easily grime sticks, but it’s not scratch-proof. For impact protection (rock chips, deep scratches), that’s where PPF is the right solution.

You can, but results depend heavily on prep, environment, and technique. Most failures come from skipping decon/correction, applying in poor conditions, or leaving high spots. If you want it done once and done right, we handle the full process.

It depends on paint condition and the level of correction needed. Ceramic installs are not “wash and coat.” Prep and polishing are the difference between average and incredible results. Plan on about 6 hours for the 3 Year Shield and about 8 hours for the 5 Year Shield; deeper correction is quoted after a quick vehicle assessment.

Yes, but we recommend correction first. Ceramic doesn’t hide defects. It preserves the finish underneath it. We’ll recommend the right correction level so the coating locks in the best possible outcome.

Depending on your package, we can protect paint, wheels, glass, and exterior trim. We’ll confirm surface compatibility and outline exactly what’s included before we begin.

No. Rock chips are impact damage. Ceramic is a chemical/environmental barrier and cleaning upgrade. For rock chip protection, we recommend PPF on the high-impact areas.

It improves water behavior (beading/sheeting) and makes mineral deposits easier to remove, but water spots can still happen if hard water dries on the surface. Proper washing/drying is still important.

Yes. Ceramic helps reduce bonding from road film and makes winter contamination easier to remove, which helps preserve gloss and reduce long-term clear coat wear when maintained properly.

Absolutely. Outdoor vehicles take the most UV, fallout, and grime. Ceramic is one of the best upgrades for keeping the car easier to maintain and looking consistently sharp.

Use a safe hand-wash method, quality pH-neutral soap, clean microfiber towels, and avoid harsh brushes. If you want it effortless, we offer maintenance washes designed specifically for coated vehicles.

No. Ceramic is your protection layer. You can use ceramic-safe toppers if desired, but waxing isn’t required to maintain gloss and water behavior.

Not mandatory, but periodic maintenance keeps performance at its peak. A proper decon wash and inspection schedule helps the coating stay slick and hydrophobic long-term.

We’ll give you exact aftercare for your install. In general, you want to avoid washing immediately after application and keep the vehicle dry/clean during the initial cure window.